Small-Scale Geotextile Dewatering Liner for Mechanically Fed Dumpsters

TITANLiner™ Roll-Off Dumpster Dewatering Liner

Where TITANTubes® (which come in all shapes and sizes) are designed to dewater slurry that is hydraulically fed to the tube, TITANLiner™ is an open-top liner with flaps on all sides to go over the walls of a roll-off dumpster. This system accepts wet waste that is dumped mechanically or from a slow pumping source. Gravity causes the water to drain through the pores of the liner while solids are retained until they are dumped and the process is repeated.
TITANLiner™ geotextile dewatering liner installed in roll-off dumpster prior to filling

Small-Scale Geotextile Dewatering Liner for Mechanically Fed Dumpsters

What Is TITANLiner™?

TITANLiner™ is a geotextile dewatering liner sized to fit inside a standard roll-off dumpster container. Wet waste is dumped in; water drains passively through the OS-series high-flow woven geotextile liner and out through the dumpster’s drain plugs. The dewatered solid stays contained for disposal. Small-volume site dewatering, catch basin cleanout, and shut-down cleanup — handled at dumpster scale.

Key Product Information

TITANLiner™ — In the Field

Ready to Discuss Your Project?

Contact Flint Technical Geosolutions for a free consultation and custom quote tailored to your site, budget, and timeline.

Free Consultation

Request a Quote

Tell us about your site, budget, and timeline. Our technical team will reply with a custom quote for your environmental or coastal protection project.